Ah, my bad. I didn't even notice Bill specify that the tech came on Saturday.

Maybe we could get Allan to start playing on the Left side for now ; )

Yes, Allan, try the left side, he should know real fast if the problem is gone?

Bill, will SakuraCon be using one (or both) of the dance games from Acme?  Just want to make sure I don't head down there to stomp on arrows later this week only to find out the machines are gone for a few days.

I played yesterday (Sunday, April 1) and the up arrow on the left side was still smoked. I'm a pretty big guy and a fairly competent player, so I'm positive I was hitting it hard enough, but almost every single up on the left side did not work for me, even though all 7 other arrows did. Hate to be the bearer of bad news, but might as well report problems

We're taking ITG for the weekend, but SN2 will still be there.

Just so everyone knows, I'm going to take a little time after the machines are dropped at the convention center on Thursday to install the new Debian drive and see if I can't make it cooperate with the USB ports.  I'm hopeful that everything will work out this time around, but precedent says don't expect too much.  I guess we'll see what happens on Thursday.

NEVERRRRR!! I'LL NEVER TURN TO THE DARK SIDE!!! Hey how did I end up in this discussion anyway?    You guys and your left side... What about my broken bar....?


Anyway I watched Chris and Abbye play on the left side quite a bit yesterday and there didn't seem to be any real problems anymore. I GUESS I can actually test it today when I go.

I played for a bit on Monday evening around 8pm or so, and noticed a few Way Offs on the 1P up arrow, at a difficulty level that should have been a gimme, even for me.

It wasn't happening regularly, but it happened often enough to be suspicious.

I'll be here again Friday evening (probably will be my weekly day), now that the machine will be back by then  I hope you all had fun at the con, had I returned to DDR/ITG sooner i would have come, but it's important to get the maximum amount of practice/dollar i can.

Please tell me the Pump NX at Sakura Con is going to Acme...

We are thinking about it.  I was hoping Laura would start a poll, to see if everyone would mind Super Nova being gone for NX.

The Supernova machine is only infrequently played (by anyone else) while I'm there.  I will continue to play it if it is there, or will switch to whichever of Pump/ITG happens to be open at the time if Pump is swapped in.

When is ITG due back to Acme from SakuraCon?

ITG went back last night about 7:00 P.M.

I'm probably a minority among the regulars, but if SN2 got swapped out for Pump, I'd honestly have no reason to go to Acme ever.

FYI:
Acme is having a private event tomorrow, April 11 from 3:00 P.M. to 7:00 P.M.  All arrow smashing is now squashed during that time. 

Other Acme news.  Yes, I know this is not likely to excite anyone here, but we are setting up a new Triotech Typhoon motion simulator there in the morning.  We needed something almost as big as that crane to make the crane seem more in place, haha.

There currently isn't any bar on the right side of the ITG cab. Looks like Typhoon got set up next to it, but it's presently out of order. It's pretty easy to hear the dance machine; now start working on your no-bar skillz people.
 

Yes, no bar raping permitted this weekend.  The bar is back at the shop for welding repairs. 

As per the long winded angry-ish message I just left you after I left you a not-very-urgent 'the bar needs maintenance soon-ish', can you please fix these things during the week, rather than prime-time weekend when everyone wants to play? I mean come on... The screws just needed to be tightened, that was it; they were all loose. Nothing was about to break. I was going to play today... And tomorrow... Just please get it back as soon as possible (even unwelded with just the screws tightened like was requested...)

Thanks


Oh btw post #500. Zing! Lets make it a good one...


So to contribute to the SN/Pump debate, James said
While I'll go to Acme for ITG obviously, I don't ever play pump either, because I just don't like it as well, and it's really nice to be able to stay warmed up on DDR when ITG is being used (as in, it keeps me playing ITG longer and keeps me from simply leaving when more than 2 or 3 other people are there). I think taking out the second 4-panel for a 5-panel is not a good trade, and many people who frequent Acme for 4-panel would be very upset. A much better exchange would be SN2 for Pump AND DDR Extreme (which Acme would be presumably fine with, since they wouldn't just be 'downgrading SN2'). We really should keep 2 4-panel machines there though, the lines get pretty ridiculously long as-is with the best ITG machine around. People come to Acme for 4-panel and to reduce that to 1 machine would really not be a good move, in my opinion and observation, and would effectively reduce the amount I, and probably others, play at Acme. Thanks for the consideration 

At Allan,
I just tried to hear your phone message, but you are very broken up and hard to understand.  But after reading your above post, I did get the jist of it all.

Yes, our tech's responded to your loose bar complaint.  After the allen bolts you can see were tightened, there was no difference.  So, the tech pulls tha stage aart to see where the area where the bar mounts.  The area we previously welded a couple times has come totally apart this time.  They could not save it with a weld job, the metal is shot and weakened, so we are having to make a complete base plate assembly.  Andamiro has none, special order from Korea taking several weeks.  So, we are rebuilding it in house so it can be back together by Monday night.

Allan, can you not rape the bar to your hearts content on the left player one side? 

All I can say is

Damn. Well I guess I've got no choice. I don't know why people are so violent with the bar... Thanks for rebuilding that in any case! Your indefatigable upkeep of the machine is, as always, greatly appreciated by all of us  

Thanks for the nice response, glad you are not going to kill of any of us next time we walk in, haha. 
this all makes me laugh, remembering back about 10 years ago when players from outside the state were saying that Washington promotes bar raping.  I remember one of those guys from Oregon telling me we should remove the bars from all our DDR cabinets up this way.  Good times, back in those days.  :-)

If I recall, California actually made us our very own image macro of the Space Needle bar raping.  I wonder if Met or Foy or any of the old crowd still have that image saved!

I remember that, funny! 

Came here today from 7:30-9. No ITG players were there, but lots of people in the arcade, so I went in for a load of runs Hope to catch you guys next week. I come every friday evening.

Have they fixed the USB drive on the ITG2 Dedicab at Acme yet?  I want to start playing there, but I really hate that I cannot play my custom songs.

The USB drives are still out of order unfortunately. It is a very complicated fix and being worked on. However it should be noted there are over a thousand custom songs on the machine already, I can't imagine being unable to find things to play...