Dance Dance Revolution Arcades website. Seattle, Tacoma, Portland DDR and Arcade Games forum.Get New Topic Alerts
PNWBemani RSS PNWBemani on Twitter
 
Pages: [1]
0 Members and 1 Guest are viewing this topic.
cwkarma123
September 14, 2014, 08:05:38 PM - ORIGINAL POST -

Good news everyone!  Cheesy

After the recent events that have been taking place at ACME, my team and I have migrated to Narrows Bowl where we will be revamping the ITG 2 cabinet there! After speaking with Bill, we were given full consent to bring this machine back to its former glory!

Although it is a converted cab, we will be flush modding stage and adding a brand new computer!

The new computer will provide a theme selector, therefore we will have access to Simply Love, Bearpocolypse 4, Groove Nights, and even Chromatic themes! We will be providing every pack that you can find at ACME and more!

The computer is courtesy of our own Bauregaurd!  Wink

Abbye, Nick, Kevin and I will be going tomorrow, 9/15/14 at 3:00 PM to rework every last aspect of this machine and we promise a glorious revival of the converted cab at Narrows Bowl!

We will continue to keep everyone updated with our progress and we expect this machine to be up and running at 100% by the end of this week!

For those living closer to Narrows Bowl, you now don't have to travel as far to enjoy ITG! Cheesy

Luckily, for Abbye and I, it is a 5 minute drive so servicing the stage would never pose a problem!

I encourage all players, especially those down south, come play on our newly revamped/reworked ITG 2 converted cab, I promise you will love it!  Wink

Thanks!
 
Rose
Read September 14, 2014, 08:26:39 PM #1

I do encourage players down south to come up and play once we get this machine running. I do think it will take a little time to work out any kinks. The machine is need of a lot of TLC.



 
Pilon
Read September 14, 2014, 09:40:28 PM #2

NEVER!!!!
 
cwkarma123
Read September 15, 2014, 05:08:21 PM #3

Just got back from Narrows after working on the stage...

Boy I have to say, it is an utter mess in there! Angry

Got P1 side working relatively well with the flush modding, but it will require a little more TLC for it to be at 100%.

Each stepping sensor has 1 layer of weather stripping and 35 layers of tape. We kept it simple since the sensors are UBER sensitive. We will continue to test the stage until we find the perfect balance, and that will require a lot of playing and a lot of time.

Also, Bauregaurd is working on getting a new system up and running at least by next Monday.
 
DJ Yoshitaka
Read September 15, 2014, 08:52:00 PM #4

Hey what guide are you guys following for your pad mods?  I just used some foam in my piu pads to raise them a bit but its seems like I could do better.  I dont want them flush just not literal craters
 
cwkarma123
Read September 15, 2014, 09:48:07 PM #5

Hey what guide are you guys following for your pad mods?  I just used some foam in my piu pads to raise them a bit but its seems like I could do better.  I dont want them flush just not literal craters

We are utilizing our own method to flush mod the stage. It is working really well, just a matter of fine tuning some panels.
 
TMN (Taylor)
Read September 15, 2014, 09:54:01 PM #6

Sounds awesome! Narrows is like 5 min away from my school so this makes travel a lot easier. Will be coming hopefully sometime this week to try it out. Thanks everyone who was involved in this!
 
BLueSS
Read September 16, 2014, 07:46:31 AM #7

We are utilizing our own method to flush mod the stage. It is working really well, just a matter of fine tuning some panels.
It sounds like the community could benefit from a quick tutorial about the flush mod you're doing, Chris!  Smiley
 
cwkarma123
Read September 16, 2014, 09:56:35 AM #8

It sounds like the community could benefit from a quick tutorial about the flush mod you're doing, Chris!  Smiley

Ask Tony and Laura about it, I'm sure they have it under control.  Wink

Besides, I'm sure they have connections they can ask for some advice.  Smiley

« Last Edit: September 16, 2014, 10:12:19 AM by APHR »
 
Iori241
Read September 16, 2014, 10:17:01 AM #9

Ask Tony and Laura about it, I'm sure they have it under control.  Wink

Besides, I'm sure they have connections they can ask for some advice.  Smiley
i don't think tony any laura are modding narrows, so i don't think they know about the situation there! btw, i am actually interested in your methods since an associate of mine did play at acme and was wondering if you did the plastic/tape method or not. also, that seems a little passive aggressive bud Wink


« Last Edit: September 16, 2014, 10:19:19 AM by THOT CATALOG »
 
cwkarma123
Read September 16, 2014, 11:08:28 AM #10

Not trying to be passive aggressive. I just believe that Tony and Laura are on top of it, I believe that they have the knowledge base to take care of things. They've been around for over a decade, I'm pretty sure they don't need my year and half worth of experience, they've got it.  Smiley

The ACME machine is no longer my responsibility, that is why I'm leaving it in their hands.  Tongue
 
 
Pages: [1]
 
Jump to: