Dance Dance Revolution Arcades website. Seattle, Tacoma, Portland DDR and Arcade Games forum.Get New Topic Alerts
PNWBemani RSS PNWBemani on Twitter
 
Pages: [1]
0 Members and 1 Guest are viewing this topic.
oooooooooooooooo
June 01, 2016, 03:10:33 PM - ORIGINAL POST -

Oh hai,

If you're in the Seattle area and you're looking for a better pad, I've got a Cobalt Flux for sale. I'm only looking for $110 for it, as it's heavy and I don't want to deal with ebay shipping.

It comes with a USB / PS2 control box and everything works in good shape.

Here it is, sitting snugly in the back of my car, waiting for your feet to stomp to the beat! https://i.imgur.com/3OiEmNy.jpg

First offer gets it!
 
Suko
Read June 01, 2016, 03:28:59 PM #1

Nice. I'll tell a few people I know about this.
 
oooooooooooooooo
Read June 07, 2016, 04:21:43 PM #2

Nope! it's still here!
 
king_craven
Read June 08, 2016, 09:49:02 AM #3

hi there. i see that you wish to sell locally but if ud be willing to ship id be willing to buy
 
oooooooooooooooo
Read June 08, 2016, 03:48:34 PM #4

Shipping for this thing is insane! Sorry!
 
patrick
Read June 12, 2016, 12:22:58 PM #5

Many thanks to echohack for the pad! Now, to find a way to fix a bad sensor...
 
Suko
Read June 12, 2016, 12:46:08 PM #6

On my CF it is just two metal plates that make contact when pressed. I think all you have to do is unhook the plate, bend it a bit so it's concave and put it back in place. Other people have used pennies (I think) to make contact between the two plates. I never did this because I thought over time the pressure of the penny on the same spot could damage the metal plates.
 
patrick
Read June 12, 2016, 01:13:18 PM #7

On my CF it is just two metal plates that make contact when pressed. I think all you have to do is unhook the plate, bend it a bit so it's concave and put it back in place. Other people have used pennies (I think) to make contact between the two plates. I never did this because I thought over time the pressure of the penny on the same spot could damage the metal plates.

The pad is the same as yours, I believe. I'll try that, thanks Suko.

Before I start, any tips or can I just remove it from the velcro and bend it with my hands?
 
Suko
Read June 12, 2016, 05:44:53 PM #8

Well, look carefully before doing anything. When I did this mod it was literally 10 years ago, so my memory is hazy. Just take it apart 1 step at a time and don't bend the metal too much. Just a bit and test it.
 
Ghost
Read August 01, 2016, 07:48:59 PM #9

I think I commented on your reddit post as well. Is the pad still available?
 
 
Pages: [1]
 
Jump to: